BIXOLON SRP-352plusA&C Manual do Utilizador descarregar pdf (Página 12)

Rev. 1.03

- 12 -

SRP-350/352plusA&C

ESC - n

[Name]

[Format]

[Range]

[Default]

[Description]

Turn underline mode on/off.

ASCII ESC - n

Hex 1B 2D n

Decimal 27 45 n

0 ≤ n ≤ 2, 48 ≤ n ≤ 50

n=0

▪ Turn underline mode on or off, based on the following values of n :

n Function

0,48 Turns off underline mode.

1,49 Turns on underline mode, set at 1-dot width.

2,50 Turns on underline mode, set at 2-dot width.

ESC 2

[Name]

[Format]

[Description]

Select default line spacing.

ASCII ESC 2

Hex 1B 32

Decimal 27 50

▪ Sets the current line spacing to approximately 4.23mm {1/6”}.

ESC 3 n

[Name]

[Format]

[Range]

[Default]

[Description]

[Notes]

Set line spacing

ASCII ESC 3 n

Hex 1B 33 n

Decimal 27 51 n

0 ≤ n ≤ 255

▪ Equivalent to approximately 4.23mm {1/6”}.

▪ Sets the current line spacing to [n x vertical motion units] inches.

▪ The maximum settable line spacing is 1016mm {40”}.

ESC = n

[Name]

[Format]

[Range]

[Default]

[Description]

Select peripheral device.

ASCII ESC = n

Hex 1B 3D n

Decimal 27 61 n

0 ≤ n ≤ 3

▪ Serial interface specification :

- When turning on the printer : n=1

- When executing ESC @ :

Setting before executing ESC @

1 2 3

After ESC @ processing 1 2 1

▪ Selects device to which host computer sends data, using n as follows :

n Function

1 Specifies printer only.

2 Specifies customer display only.

3 Specifies printer and customer display.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 53 54

Comentários a estes Manuais

Sem comentários

BIXOLON SRP-352plusA&C Manual do Utilizador Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir BIXOLON SRP-352plusA&C