
Rev. 1.03
- 53 -
SRP-350/352plusA&C
GS r n
[Name]
[Format]
[Range]
[Description]
Transmit status.
ASCII GS r n
Hex 1D 72 n
Decimal 29 114 n
n=1, 2, 49, 50
▪ Transmits the normal status specified by n as follows :
n Function
1, 49 Transmits paper sensor status.
2, 50 Transmits drawer kick-out connector status.
▪ Paper sensor status (n=1, 49) :
Bit Off/On Hex Decimal Function
Off 00 0
Paper roll near-end sensor : paper adequate.
0, 1
On 03 3
Paper roll near-end sensor : paper near end.
Off 00 0 Paper roll end sensor : paper present.
2, 3
On 0C 12
Paper roll end sensor : paper not present.
4 Off 00 0 Fixed.
5 Off 00 0 Reserved.
6 Off 00 0 Reserved.
7 Off 00 0 Fixed.
- Bits 2 and 3 : This command cannot be executed since the printer
becomes offline when the paper roll end sensor detects the paper not
present. Therefore, the status of bit 2 (1) and bit 3 (1) is not transmitted.
▪ Drawer kick-out connector status (n=2, 50) :
Bit Off/On Hex Decimal Function
Off 00 0
Drawer kick-out connector pin 3 is LOW.
0
On 01 1
Drawer kick-out connector pin 3 is HIGH.
1 Off 00 0 Reserved.
2 Off 00 0 Reserved.
3 Off 00 0 Reserved.
4 Off 00 0 Fixed.
5 Off 00 0 Reserved.
6 Off 00 0 Reserved.
7 Off 00 0 Fixed.
GS v 0 m xL xH yL yH d1...dk
[Name]
[Format]
[Range]
Print raster bit image.
ASCII GS v 0 m xL xH yL yH d1...dk
Hex 1D 76 30 m xL xH yL yH d1...dk
Decimal 29 118 48 m xL xH yL yH d1...dk
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
1 ≤ (xL + xH x 256) ≤ 128 (0 ≤ xL ≤ 128, xh=0)
1 ≤ (yL + yH x 256) ≤ 4095 (0 ≤ yL ≤ 255, 0 ≤ yH ≤ 15)
0 ≤ d ≤ 255
k = (xL + xH x 256) x (yL + yH x 256)
Comentários a estes Manuais