Rev. 1.03
- 44 -
SRP-350/352plusA&C
- Error Correction code words (employs the Reed-Solomon Error
Detection and Correction algorithm)
- Pad codeword
- Number of bits in Character Count Indicator
- Mode Indicator
- Terminator
- Alignment Patterns (when model 2 is selected)
- Extension Patterns (when model 1 is selected)
▪ Printing of symbol is not affected by print mode (emphasized, double-
strike, underline, white/black reverse printing, or 90˚ clockwise-rotated),
except for character size and upside-down printing mode.
▪ In standard mode, this command executes paper feeding for the amount
needed for printing the symbol, regardless of the paper feed amount set by
the paper feed setting command. The printing position returns to the left
side of the printable area after printing the symbol, and printer is in the
status “beginning of the line,” or “there is no data in the print buffer.”
▪ In page mode, the printer stores the symbol data in the print buffer without
executing actual printing. The printer moves printing position to the next dot
of the last data of the symbol.
▪ The quiet zone is not included in the printing data. Be sure to include the
quiet zone when using this function.
<Function 182> GS ( k pL pH cn fn m (fn=82)
[Format]
[Range]
[Description]
[Notes]
ASCII GS ( k pL pH cn fn m
Hex 1D 28 6B 03 00 31 52 m
Decimal 29 40 107 3 0 49 81 m
(pL + pH x 256) = 3 (pL=3, pH=0)
cn=49
fn=82
m=48
Encodes and sends size information of the QR Code symbol data in the
symbol save area.
▪ In standard mode, use this function when printer is “at the beginning of a
line,” or “there is no data in the printer buffer.”
▪ The size information for each data is as follows;
Send data Hex Decimal Data
Header 37H 55 1 byte
Flag 36H 54 1 byte
Width 30H – 39H 48 – 57 1 – 5 byte
Separator 1FH 31 1 byte
Height 30H – 39H 48 – 57 1 – 5 byte
Separator 1FH 31 1 byte
Fixed value 31H 49 1 byte
Separator 1FH 31 1 byte
Other information 30H or 31H 48 or 49 1 byte
NUL 00H 0 1 byte
▪ Description of the Width and Height data sent :
- The height and width values of the symbol data are in dot units.
(8 páginas)
(31 páginas)
(149 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais