BIXOLON SRP-352plusA&C Manual do Utilizador descarregar pdf (Página 17)

Rev. 1.03

- 17 -

SRP-350/352plusA&C

ESC a n

[Name]

[Format]

[Range]

[Default]

[Description]

Select justification.

ASCII ESC a n

Hex 1B 61 n

Decimal 27 97 n

0 ≤ n ≤2, 48 ≤ n ≤50

n=0

▪ In standard mode, aligns all the data in one line to the position specified

by n as follows :

n Justification

0, 48 Left justification

1, 49 Centering

2, 50 Right justification

ESC c 3 n

[Name]

[Format]

[Range]

[Default]

[Description]

Select paper sensor(s) to output paper end signals.

ASCII ESC c 3 n

Hex 1B 63 33 n

Decimal 27 99 51 n

0 ≤ n ≤ 255

n=0

▪ Selects the paper sensor(s) to output paper end signals when a paper

end is detected.

Bit Off/On Hex Decimal Function

Off 00 0 Paper roll near-end sensor disable. 0

On 01 1 Paper roll near-end sensor enable.

Off 00 0 Paper roll near-end sensor disable. 1

On 02 2 Paper roll near-end sensor enable.

Off 00 0 Paper roll end sensor disable. 2

On 04 4 Paper roll end sensor enable.

Off 00 0 Paper roll end sensor disable. 3

On 08 8 Paper roll end sensor enable.

4~7 - - - Reserved.

[Note] ▪ This command is available only with a parallel interface and is ignored

with a serial interface.

ESC c 4 n

[Name]

[Format]

[Range]

[Default]

[Description]

Select paper sensor(s) to stop printing.

ASCII ESC c 4 n

Hex 1B 63 34 n

Decimal 27 99 52 n

0 ≤ n ≤ 255

n=0

▪ Selects the paper sensor(s) to use to stop printing when a paper end is

detected.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 53 54

Comentários a estes Manuais

Sem comentários

BIXOLON SRP-352plusA&C Manual do Utilizador Página 17

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir BIXOLON SRP-352plusA&C