BIXOLON SPP-R300 Especificações descarregar pdf (Página 19)

SPP-R300 Command Manual

Rev. 1.00 BIXOLON

- 19 -

ESC *

Function: Specify bit image mode

Code:

ASCII

ESC * m nL nH d1...dk

Hex

1B 2A m nL nH d1...dk

Decimal

27 42 m nL nH d1...dk

Range:

m = 0, 1, 32, 33

0 ≤ nL ≤ 255

0 ≤ nH ≤ 3

0 ≤ d ≤ 255

k = nL + nH × 256 [in case of m = 0, 1]

k = (nL + nH × 256) × 3 [in case of m = 32, 33]

Default:

None

Description:

■ This command specifies the bit image for the mode m as to the number of dots specified by nL and nH.

• d specifies the bit image data with 1 for printed data and 0 for not printed.

• k denotes the number of horizontal dots.

DPI : Dots per Inch (25.4mm)

m Mode

Number of dots in

vertical direction

Vertical dot

density (DPI)

Horizontal dot

density (DPI)

Number of bytes (k)

0 8-dot single-density 8 203/3 203/2 nL + nH x 256

1 8-dot double-density 8 203/3 203 nL + nH x 256

32 24-dot single-density 24 203 203/2 (nL + nH x 256) x 3

33 24-dot double-density 24 203 203 (nL + nH x 256) x 3

Remarks:

■ If the bit image data being entered is beyond the number of dots to be printed, the surplus will be discarded.

■ If the value of m is beyond the conditions, the subsequent data after m will be treated as normal data.

Differences:

None

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 148 149

Comentários a estes Manuais

Sem comentários

BIXOLON SPP-R300 Especificações Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir BIXOLON SPP-R300